620 LP

[Mark Poss]

I need a LP hose that goes from the vapor valve to the liquid valve on a 620. Does steiner tractor supply have these or should I try Deere or go to an LP supplier and try and have one made? Thanks in advance

 

[Jim.ME]

I need a LP hose that goes from the vapor valve to the liquid valve on a 620. Does steiner tractor supply have these or should I try Deere or go to an LP supplier and try and have one made? Thanks in advance

If you have the old hose. I would try a local LP supplier first. A forklift dealer might have resources to make on as well. You should ask PartsASAP to see if they can supply one, they do provide this site.

 

[Mark Poss]

I just got the tractor it didn’t have the hose on it. It might even be a steel line

 

[Jim.ME]

I just got the tractor it didn’t have the hose on it. It might even be a steel line

Here is a link to the 620 parts catalog. You can use it to figure out what is missing and have a part number(s) to search with (and if you are looking for a hose or steel line.

JD 620 Parts Catalog PC528

 

[m16ty]

Probably just go to a hydraulic place that makes hoses and have them make you one. Be sure to tell them it’s for propane, a regular hydraulic hose will work but a propane rated hose is lower pressure and much more flexible. Also, a hydraulic hose won’t last as long.

 

[trackrat]

On propane you can use copper tubing if you can match the fittings

 

[mazzrod]

Using hydraulic hose for propane use is a no,/,no the reason why is propane will degrade the rubber in the hose.and how I know this is through the use of a propane cutting torch. Regular hose for use with regular cutting torches is not used because the gas ruins the hose over time. A hose marked for all gases is used for propane cutting.so the hose used in your case should asked if it's okay for propane use. I hope that is understood

 

[trackrat]

NO HYD HOSE FOR PROPANE we have had propane tractors for 65 years before propane was butane propane hose is a different type of rubber