Larry NEIL
Well-known Member
Remember a discussion here about replacing a 770 clutch by just taking the fuel tank off. While unbolting the feul tank, I noticed that the driveshaft coupling is one piece, not 2 halves like on my older Olivers. Will the bellhousing slip over the coupling, and how do you separate the shafts?
Sorry for the dumb questions, my IT manual is clearly fuzzy and although is says 77 Fleetline, Super 77 and 770 it seems to be mostly 77 photos..and my 770 does not have a two speed.
Thanks for the help!
Sorry for the dumb questions, my IT manual is clearly fuzzy and although is says 77 Fleetline, Super 77 and 770 it seems to be mostly 77 photos..and my 770 does not have a two speed.
Thanks for the help!