711 Loader on a NAA

[Yudt06]

I?ve posted here several times over the past 4 or 5 years
regarding a 711 loader on an NAA. I bought the loader back
then and didn?t realize at the time how scarce the brackets
and hydraulic valve to run the loader were on my model.
Needless to say I?ve acquired the hip bracket for the NAA as
well as the diverter valve. Some pics of them mounted. The
loader is going out to sandblasting and powder coating soon!

 

[Kirk-NJ]

Since you say you have the hip bracket for the NAA you will also need brackets for under the tractor to bottom of loader frame, front bracket and trans plate bracket. Post photos of what you have. Photo is of some of the brackets you need, missing is trans plate and hip bracket.

<a href="https://imgur.com/nMbS6pm">

</a>

 

[Yudt06]

Have all brackets except for the front one. As soon as I get my loader mounted to the back hip bracket I?ll make a cardboard cut out of it and send it off to my Cnc guy.

 

[Yudt06]

The plate under the steering box has to be made as well.

 

[Kirk-NJ]

Photos appear to have trans plate. If you need front plate I can make a cardboard cutout. I can also do that with trans plate