713 backhoe

[Diggerdon]

I have a ford 821 with a 713 backhoe mounted on it. Does anyone have a procedure for removing it from the tractor? It looks like a factory mount.

 

[Andy Wickiser]

Below is the procedure from the manual. Hint, let the backhoe do the work. After the first time or two you'll develop your own style.


<Img SRC=https://i.postimg.cc/DyYY2cdD/Ford713-Detach0001.jpg>
<Img SRC=https://i.postimg.cc/Qd247xzJ/Ford713-Detach0002.jpg>
<Img SRC=https://i.postimg.cc/2j00wxJ6/Ford713-Detach0003.jpg>

 

[Tom in Mo.]

As Andy says, the backhoe does all the work. If your stabilizers leak down then be sure to have some large blocks handy to help hold the unit up. Be extremely careful as this can be a dangerous operation especially for your first time. Follow the directions carefully and you will be amazed at how simple it turns out to be.

 

[Diggerdon]

I have the parts & service manuals for the 713. What manual are you using to get the procedure? I need to buy that one. Thanks for the help.

 

[Diggerdon]

Thanks for the info. Which manual are you using?

 

[Tom in Mo.]

That would be the operators manual

 

[Andy Wickiser]

<img SRC=https://i.postimg.cc/zXrnHgvX/Ford713-Operating.jpg>

 

[Diggerdon]

Thanks for the info. Thats the only one I don't have.

 

[Tom in Mo.]

Wow look at those pie weights. Impressive.

 

[Diggerdon]

Thanks to everyone, it was very simple.