8 n radius socket mounting bolts

[dc in illinos]

hello all,
I can Admit I not the sharpest tool in the shed but, I cant find the correct size bolts to mount the replacment socket and cap bolts to the tractor if anybody can help me with this it would be a big help

Thanks Bob

 

[Papillon]

Mine mounted on 3 studs with I think 11/16 fine thread nuts. I can verify the hex nut size tomorrow.

 

[wore out]

(quoted from post at 17:27:33 04/10/22) hello all,
I can Admit I not the sharpest tool in the shed but, I cant find the correct size bolts to mount the replacment socket and cap bolts to the tractor if anybody can help me with this it would be a big help

Thanks Bob

2 used, stud, Radius Rod Ball Cap, Spacer & Ring Board, Bracket to Transmission, 7/16''-14-20 x 3-9/16'', 8N; (Prod Date) Between 01-Jan-1948 and 31-Dec-1952. Secure the "cap" on and pass through the spacer/back half of ball socket and thread into the transmission case.

1 used, stud, Spacer & Ring Board, Bracket to Transmission Case, 7/16'' - 14-20 x 1.57'' (88398S); (Prod Date) Between 01-Jan-1939 and 31-Dec-1952. Secures the spacer/back half of ball socket to the transmission case.

 

[dc in illinois]

Thanks for your help

Bob

 

[dc in illinois]

Thanks that would be great because i was
confused one side was studs and the other
bolts