801 work master wiring

MQuig

New User
Hello all, new member with a 801 diesel. I had it overhauled and use it on a hobby farm. Its a good little tractor.

Currently Im having wiring issues. I changed from a generator to a one wire alternator. It was already a 12 volt system. Id like to rewire it as its giving me troubles. Glow plugs wont work and over the winter it stopped starting via the push button switch. Last year I replaced the soliniod closest to the starter, the one under the hood for the glow plugs was clicking, I tried to replace it, now Ive got nothing working. Any ideas of help would be greatly appreciated.

This post was edited by MQuig on 03/25/2022 at 03:47 pm.
 
When you replaced the glow plug solenoid, did you buy the correct relay or just
get one from the auto supply?

Not all solenoids are wired the same internally. Some ground through the
exciter terminals, some ground through the base. Not sure which one you need
but something to look at.

A simple test light would be a big help diagnosing electrical problems. Without
it, it's all guess work and multiplying problems.
 

I bought it from a auto parts store. Ive no idea if its the right one, salesman wasnt much help. I have a text light, I see most of the wiring for the key, starter button all are wired negative. When Im not getting closer through the solenoid it appears. So it could possibly be a grounding issue. Im told a member her Usda good schematic, it could use a cleanup on the wiring.
 
MQ welcome to YT! Well I was going to is a post from another
forum that has a wiring diagram. This forum is blocking the similar interest web site from being posted. So web search ..forum with 801 power master wiring diagram.. it should pop up it was a May 27, 2017 post. it It is for a diesel model
but unfortunately it does not show a glow plug system.
I am not a Ford guy but best guess would be the glow
plug solenoid would pickup power at the starter
solenoid on the same terminal the battery cable
connects to. Or it would connect to the ..terminal
block.. to the right of the voltage regulator on the
diagram. There is a possibility that it may get its power
from the keyed side of the ignition switch. So with that
information you need to see if you can figure out what
you have going on. I hope you realize that the battery
post and inside of the terminal have to be nearly shiny m
lead to make a good connect and the other ends if the
battery cables also have to have clean and tight
connections. There is a Ford specific forum section
here as well maybe if you post over there someone can
help you out there, See 2nd link If not send me an
email I can connect with you by other methods to get
you some help.
YT Ford topic section
 

Thank you for the help, I didnt find the forum right off, your link got me there. Hopefully get some info, the regulator is gone now as not needed with the alternator.
I saw the post you referred to, there is a member here with good diagrams, Ive not found them yet.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top