806 injection pump

[CJW100]

Hey so a while ago I put a post on here about a 806 and a 1066 we had that both had injection pumps rebuilt but we never got the pumps back on for 10 years anyways had the 1066 running strong after we got it back on but Im just barely getting to the 806 and got the pump on and timed and went to put the injection lines on and the bolts for it are nowhere to be found. Went to the dealer and they got the part number but dont stock it anymore. So I called the local pump repair shop and they said since they dropped the rd pumps however many decades ago they dont support them anymore anyone have any idea where I can get some? Part number is 341193r1 thanks for any answers

 

[Roger Link]

Which fuel pump do you have? the RD or the roosa-master stanadyne

 

[fastfarmall]

The Diesel Tech is going to be your best resource, he will be on when he gets off work, i am sure!

 

[CJW100]

Its the RD IH pump

 

[rustred]

i thought those RD pumps got upgraded to the rosa master.

 

[Dieseltech]

Most were replaced with the Roosa pump, a few RD pumps still exist, the ones that have not exploded yet...

 

[caterpillar guy]

I'm still running an old RD pump on an 806 runs good for now. I may have to update something in the furure but for now it still goes. I would guess you might have to go junkyard looking for pump bolts if somebody just happens to still have some setting around. Might try Harvey Gross. 810 638 5569. No guarantees.

 

[EP]

Try Spencer diesel in Spencer Iowa. They have helped me out with a couple of those rds that I have rebuilt.

 

[CJW100]

How much do you guys think it would be to upgrade to the Roosa? This rd pump is fresh rebuilt so it should be good to go for a lot of years. Just need to find the banjo bolts. Might have some up in burley Idaho. Stopping by a shop friday