810A plow

[Machinery-Man]

well I finally identified that plow..is an 810A, per post A was for A frame on front. Anyway and adding the tailwheel tonight, some welding with nickel to cast. Can anyone advise as to the rubber wheel if it was solid or inflatable. I've also go another wheel assy less bracket but the arm is reversed. If anyone actually has a rear photo of the plow I'd like to see the setup. Have ordered an operator's manual. There were several configurations of these plows. Really confusing but fun.

 

[LittleD]

M..M,
I believe the 810A came standard with a steel rear wheel and had the (rubber tire with tube) as an option.

Hope the pics help, Rich

 

[LittleD]

M..M,

Here is a John Deere photo of an 810A plow with the steel rear wheel.
Enjoy your project, Rich

 

[Machinery-Man]

Thanks, Rich....it is as I thought...I put the 810 bracket on my plow as I didn't have the cast piece for the 810a. Looks like they befeed it up..on the 810A...maybe I'll run across one some where on junk plow...I have the guage wheel and the extra support strut...I shorted my handle but have an extra long one....the shorter looks little more modern...these look like great plows.....

 

[Machinery-Man]

here is pic of the plow

 

[Machinery-Man]

here is pic

 

[Machinery-Man]

Another pic

 

[LittleD]

M..M,
You say you have another wheel assembly but the arm is reversed..........it may go on a set up like my two-way.
Rich

 

[Machinery-Man]

LittleD, the bracket appears the same as in your picture and the photos sent to me. The bracket is heavier duty and I know the shaft size is slightly larger. I'm sure JD beefed this up with the 810A, I'll get my owners manual in a few day and will see. The other bracket will work and I may have to use, finding the other bracket will require a junk plow but scavenger hunt is my bag anyway....I really like these plows and they are much heavier than the 45 model I used to have. I can't see why you would have any trouble with them going into the ground, if anything keeping them from sinking might be an issue.