Thanks for all the help thus far folks. But we're still not there.
Batt. voltage is 6.8. When running it's 8.6 and goes to 9.2 within 1 minute so I shut it down. So I replaced all wiring into and out of gen. and reg. with 10ga. Both new regulators do the same thing although one bounces the ammeter needle more than the other.
Any more ideas?
Batt. voltage is 6.8. When running it's 8.6 and goes to 9.2 within 1 minute so I shut it down. So I replaced all wiring into and out of gen. and reg. with 10ga. Both new regulators do the same thing although one bounces the ammeter needle more than the other.
Any more ideas?