8n Alternator 12 Volt Conversion Kit

[Anonymous-0]

i am converting my 1948 ford 8n to 12 volt and it did not come with instructions. where can i find hook up instructions.

 

[Janicholson]

We have no way to tell you because it all depends on the type of alternator (or possibly generator, if that conversion is chosen.
If it is using a common GM alternator Many diagrams (no real difference) are posted in the archives for the wiring. JimN

 

[Bob]

Since this would be a "front-mount" distributor, it is even more important to know what coil he has... original 6-Volt or a "so-called" 12-Volt coil.

The 6-Volt coil needs the OEM ballast resistor left in place PLUS a "converting resistor".

A "so-called 12-Volt coil" of recent manufacture typically needs the EOM ballast resistor left in the circuit, as it will overheat on a diet of full battery voltage.

 

[souNdguy]

The others got yuo covered.. but typically one would post an 8n question in the actual 8N forum. If you have any more posts concerning this problem.. why not make them over there.

Soundguy

 

[souNdguy]

Say Bob.. I was thinking of the perfect 12v conversion instructions to send him.. (wink)

soundguy

 

[Bob]

Be NICE, S.G.!!!

 

[souNdguy]

I'm trying.. I'm just not good at it sometimes!

soundguy