8n electronic ignition

hatch

New User
hey guys just wanted to ask have any of you swapped over to the
electronic ignition kit for the 8n side mount dist and if so how
do you like it? pros cons would like to hear your feed back.
 
So what is wrong with points and condenser ignition? It has worked for many, many years. Easy to diagnose a
problem especially on a side mount dist. I learned how when I was about 12 year old now 75. My 48 8N has been trouble free for many years.
 
I Switched over 2 of my 01 series Fords, and 2 9Ns with the front mount distributor. After 10 plus years absolutely no regrets, especially on those front mount
tractors. Smooth running and quick starting, even when left out in wet, cold weather.

I keep hearing how bad and low-quality the replacement points and condensers are now, but that isnt a problem for me.

Of course, I keep a spare distributor with traditional ignition components on-hand in case a pick-up or module fails, but so far none have.
 
I installed Pertronix in mine a year ago, as well as replacing wires with suppression type. No issues at all. Starts instantly, and no maintenance. I also have Pertronix systems in my Onan JC generator, as well as the Onan CCK and LK. Again, no maintenance. Why use points and condenser, with the attendant possible condenser failure and point deterioration? But, each to his/her own devices! zuhnc
 
I seen good and bad luck with doing so. Me I'll stay with points and condenser. I have tractor that have not had a new set pf points in them for more then a decade and they start up and run just fine year after year
 
One problem is tractor conversion elec ignition systems arent the same quality of modern well engineered automotive ignition
systems, however as long as they are working !!!!!!! Sure they are better engineering speaking but if they fail you're dead
versus a set of points you may file and re gap and get back home. A solid state device isnt prone to bouncing burning ringing
like a set of mechanical points, but again thats ONLY so AS LONG AS THEY ARE WORKING. I dont see auto makers going back to old
school points and condensors but for an old tractor a conversion kit just isn't the same thing

John T
 
I own about six tractors all with points. They all are trouble
free. Never had a single set of points not last at least ten
years. I do no maintenance on my points once the cap goes on. I
make note in my note book when I change points. When I think
I've gotten my money s worth I change them.
 
(quoted from post at 20:46:34 04/22/21) So what is wrong with points and condenser ignition? It has worked for many, many years. Easy to diagnose a
problem especially on a side mount dist. I learned how when I was about 12 year old now 75. My 48 8N has been trouble free for many years.

Good question. I find it funny how so many complain about "new technology" yet want to move away from "old school" technology.
 
OK guys stop patting yourself on the back. That kid who doesn't know how to set points? Well he can repair your computer. Or designed the network you access this site with. And learning how to set points, if someone is real slow? May take an hour instead of 15 minutes. Time marches on. You want nothing to change? Lets go back 500 years. You don't need a tractor! You can plow your garden walking and looking at the back end of a mule. And people did say we don't need cars, trains, tractors and about every other modern things out there.

I happen to like my electronic ignition.

And the same guys who brag about finding quality points are the same reason you can't find em. "I get at least ____ (insert number) of years off a set." If they ain't selling they will either sstart making them crappy or stop making them altogether!

Rick
 
(quoted from post at 19:39:30 04/22/21) hey guys just wanted to ask have any of you swapped over to the
electronic ignition kit for the 8n side mount dist and if so how
do you like it? pros cons would like to hear your feed back.

Electronic ignitions work best on 12 volts. During cranking, voltages on a 6 volt system can drop below the minimum the module requires to fire. Usually not a problem with 12 volt modules.
 

If it has a dust cover under the cap throw it away are drill it out to around 1" (maybe 7/8") The cover will hit the trigger wheel : ( That's the only drawback I have ran into...
 
(quoted from post at 13:39:46 04/23/21) I changed to Pertronics on my mf35 many years ago. No problem so far. It starts instantly.
i don't really have a problem with points learned how to set them about 40 years ago i do have a problem with quality hard to find well made parts now was just looking for an option if it ever down to that i converted alot of the older cars ive had to electronic ignition and loved it especially when i took some of those old cars to the car wash thanks for the feed back
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top