8n engine weight

[Doug 13]

Do we have a estimated weight on a 8n stripped engine with head and pan on. I want to be setup with the right equipment.
Thanks

 

[Kirk-NJ]

Block stripped 104 lbs head maybe 15/20 lbs oil pan maybe
50/60 lbs

 

[Doug 13]

(quoted from post at 02:07:37 09/18/22) Block stripped 104 lbs head maybe 15/20 lbs oil pan maybe
50/60

Ok, my lifting equipment will handle that much.
Thanks

 

[JMOR]

(quoted from post at 22:32:21 09/18/22)

(quoted from post at 02:07:37 09/18/22) Block stripped 104 lbs head maybe 15/20 lbs oil pan maybe
50/60

Ok, my lifting equipment will handle that much.
Thanks

s that really true? Bare block with no internals, but has head & oil pan installed? Sounds odd.

 

[HCooke]

Took an 9N engine to a machine shop once. The head and pan were off. Women in her early 50s come out. I offered to help her lift the block onto
the cart. She picked it up as easy as can be.

 

[Doug 13]

(quoted from post at 06:23:36 09/19/22)

(quoted from post at 22:32:21 09/18/22)

(quoted from post at 02:07:37 09/18/22) Block stripped 104 lbs head maybe 15/20 lbs oil pan maybe
50/60

Ok, my lifting equipment will handle that much.
Thanks

s that really true? Bare block with no internals, but has head & oil pan installed? Sounds odd.

A misunderstand my fault. Engine still has internals, head, and pan are on. Clutch, fly wheel, and all other externals are off. I'm working outside and did not want dirt entry.

 

[JMOR]

crank, rods, cam, gears, etc. will certainly add pounds to numbers that have been quoted.