8N radius rods

[reomack]

Does anyone know whether the radius rods can be swapped side to side if they are inverted. Does that make sense?

 

[Kirk-NJ]

Yes they can be switched. Either way they should not be bowed.

Kirk

 

[reomack]

Thanks Kirk, They are bowed now. Thought maybe I could just hit the same tree I hit the first time and maybe straighten them out.

 

[Kirk-NJ]

If you want to straighten them out on the tractor go to classic
view and send me an email and I'll show you the method I have
used. Of course this might not be your only problem. Being bow
will wear your center axle pin and bushing. Depending on how bad
the bow and how long they have been that way it could have worn
the axle pin bushing and worn the axle to a point where it is
waddled out egg shape.

 

[Tim PloughNman Daley]

They can be swapped but note that each side is set at a different length. Get your 39-53 MPC and look at the chart.

People often complain about the police, but you rarely hear about the
positive things they do, such as this incident involving a biker and a
frozen carburetor.


Tim *PloughNman Daley*(MI)

 

[Kirk-NJ]

Sent email with photos