8N with front blade

[RLBII]

Thanks to oldhokie and the brkt he made. It work really good

 

[TheOldHokie]

Super!! Love getting feedback from satisfied customers ;-) Dissatisfied ones not so much

TOH

 

[Eriklane]

Could you email me the plans? [email protected]

I've been toying with making one, and think I have a plan also, but would like to see yours...Thanks

 

[TheOldHokie]

(quoted from post at 12:32:42 01/24/09) Could you email me the plans? [email protected]

I've been toying with making one, and think I have a plan also, but would like to see yours...Thanks

If this is addressed to me the bracket I made was the front hanger only - he already had the plow frame - a rather beefy shop made one. The hanger is the same triangular hanger used on the Dearborn/Wagner loaders. I have LOTS of them in stock.

TOH

 

[Tilman]

Could you email a closer up picture of the snowplow frame and the blade mount and lift mechanisim? Thanks

 

[Jeff Edgarton]

I"d love to see some up close photos also to compare to my ideas

Thanks,
Jeff

 

[Squeak]

Hey! Does that look good! Just finished a 6 way blade for the front of my garden tractor. Works all by hand, but, what the heck. Gonna do the same for my 9N. I have a 6 way on the rear. PTO pump. Works like a dream. Could even be considered an 8 way as it rotates 360.