930 6 Speed block

[mshultz]

I'm in search of a block from a 6 speed 930 diesel with a 401 "wide block". I haven't been able to figure out from the parts diagrams if 6 speed 930's have the wide block 401 in them, or just certain models (Western special, etc.)? The Case IH site has 3 or 4 different variations of the 930 6 speed, and there are several different part numbers listed so I'm not 100% sure if they are all the same basic block or not. I'm looking for one that will accept 830 or 870 heads.

I'm also looking for the entire foot clutch assembly from a 6 speed 930.

Any leads or information is greatly appreciated! Thanks!

 

[Case Nutty 1660]

all 6 speed units have the same block, the 8 speeds are a different bell housing pattern
cnt

 

[Roger Link]

I have 2 of them out of 6 speed 930's and all the parts for a foot clutch.715-308-2163

 

[DKase]

I have a 6 speed 401 block in Eastern SD also. If you are building a puller, steer clear of the foot clutch. The hand clutch will hold twice the torque.

 

[mshultz]

I found a block a little closer to home I think (central PA), but I wasn't 100% sure if it needed to be from a specific 6 speed 930 or not. Thanks for the info guys!