930 case

[Joey Juskowiak]

hey everyone, here too pick ur brains!!! i just bought a 930,it has a 1030 injector pump on it, i had it recalibrated for the 930, and it is havin probs. overheating with a load on it, the cooling sys. is fine rad clean, no restrictins, the tractor has been sittin for approx. 10yrs, i put fuel additive in the tank and it seems to begettin better! but in about 3hrs of workin has burned 3/4 tank of fuel!!! any ideas?????

 

[Coloken]

930 Case needs double fan belts and they need to be tight.

As for the fuel over load..no way should the pump pump that much fuel if calibrated for a 930.
But check the timing.

 

[TripleRange]

You're feeding her WAY to much fuel.

 

[Tom N OK]

Mine has dual thermostats so the overheating with a load could be that one of the thermostats is stuck since it has been setting for so long. I would also make sure the fins on the radiator have been washed out good. Did you flush the old fluid out of the radiator and put new in?
Tom

 

[Dairy Farmer in WI]

i would check and replace the thermostats. that's what it sounds like
DF in WI