930 Puller

[Case8940]

I'm in the research phase of building a 930 into a farm stock. My plans are to build a 504 from a 2390 or 2590 and put that in place of the 377 gas. Our rules state we have to run the stock style injection pump and a turbo with a 2.3" inducer bore. RPM limit is 2750. I have talked to a few case pullers but I'm looking to collect as much info and advice as I can before I start my build. I have not purchased any parts as of yet and I would like to have my plan complete before I start buying things. I have been told there is a gentleman by the name a Carl Conn in Wisconsin that is an excellent resource, does anyone know how to reach him? Any and all advice and experience is greatly appreciated.

 

[Eldo case]

Make sure of your rules of location of injector pump. A 504 is located on the left side. That sometimes will not fly.

 

[jon f mn]

If it works out that you can't use a 504 block and need to convert a 930/1030 block you can call me, I have converted one to 504 for pulling and can tell you what you will need to do and the problems you will encounter. Posted my e-mail and you can call me at 320-492-9077

 

[Jerry He]

You might be better running a 70 series tractor with the 504, makes things a lot more stock appearing.

 

[toolz]

Heck, just buy my 1175. The rules in Farm Stock around here have gotten way out of hand, and I'm thinking about going another direction. It's a 504 with a big pump, injectors, lines, HX52 slugged to 2.3, and a few other mods. Makes 62 psi boost, will pull 7th gear on most tracks. It would be a lot cheaper than building one. Drop me an email if interested.

 

[SAMBO]

you wanna sale that 377 gas i need a couple of those