95 combine

[MF165farmer]

Does anyone know the wheelbase of a JD 95 with what looks to be 16.9-26 Andy

 

[coonie minnie]

We'd need a bit more information. Does it have axle extentions? Is it a square back or round back?- not sure if that makes a difference, but it may.

 

[matthies]

Can't tell you exactly but sold my dads a couple years ago to a great guy from Lexington Nebraska, and he had half a tire on an older trailer, so it would be narrow. He had to haul it couple hundred miles. chris

 

[Richard in Bee]

Are you really asking about wheel base or do you mean wheel tread? Wheel base would be the same on all of them I would think.

 

[wilamayb]

The operators manual for the late 95 combine (1967-1969) says that if you have no extensions and the tires truly are 16.9X26 (unusually small for a 95) then it should measure 84" from center of tire to center of tire. All that is assuming that the rims have never been swapped in the last 45 years..

 

[bigmike71]

The operators manual for the late 95 combine (1967-1969) says that if you have no extensions and the tires truly are 16.9X26 (unusually small for a 95) then it should measure 84" from center of tire to center of tire. All that is assuming that the rims have never been swapped in the last 45 years..

Where do I find your operators manual. Have a square back 95 came with grain header. Installed a 444 corn header. Looking for adjustments from grain to corn. Any help thanks

 

[used red MN]

Where do I find your operators manual. Have a square back 95 came with grain header. Installed a 444 corn header. Looking for adjustments from grain to corn. Any help thanks

Go to this website
JD publications
Where is says Choose Publicstion select Equipment, then by the Search box select
“Part #/Keword” type in OMH63962 to the right square with arrow to upper right allows you to view it on the web. Arrow with line below it downloads the file to your PC.