9N Dearborn 19-22 Loader

[Cattrell]

I am looking for some parts to get a Dearborn 19-22 loader up and running.

I need the adaptor sheave, drive plate and shaft to drive the pump.
I also need to rebuild or replace the cylinders, can you still get new parts fro these or should they be replaced with a modern version??

Can anyone point me in the right direction for these parts??

Thanks for the help.

 

[TheOldHokie]

(quoted from post at 16:28:33 01/09/12) I am looking for some parts to get a Dearborn 19-22 loader up and running.

I need the adaptor sheave, drive plate and shaft to drive the pump.
I also need to rebuild or replace the cylinders, can you still get new parts fro these or should they be replaced with a modern version??

Can anyone point me in the right direction for these parts??

Thanks for the help.

Th epump drive parts are all available new from this site and many others"

Sheave - 129160 ($55)
Hub, 6 spline - 192161 ($35)
Shaft, 13" OAL - 194354 ($25)

You will also need a flexible shaft coupling for connecting the pump to the shaft
L601-14 ($45)


The lift cylinders are old style SA direct displacement design - see parts diagram below. All you need is some generic packing (5), shaft wiper (3), and an o-ring (7). All of that can be obtained from most any industrial supply house.

TOH

 

[Cattrell]

Thanks!
I have a stupid question
Can you tell me where on this site to find them? I have looked again and still cant. Even putting the part numbers in the search doesnt seem to work.

Thanks again.

 

[mhb@ufe]

Upper left side of the page under Market Place
is tractor parts

 

[TheOldHokie]

(quoted from post at 17:20:37 01/09/12) Thanks!
I have a stupid question
Can you tell me where on this site to find them? I have looked again and still cant. Even putting the part numbers in the search doesnt seem to work.

Thanks again.

Typo in my part number for the sheave - should be 192160.

TOH

 

[Harry Wilken]

I just finished re-building my 19-71 Loader. I had my local Hydro shop make all new hoses for it and they said they could rebuild the cylinders as well. Mine didnt leak though. Still it shows they can still get parts and be repaired.