9n spark plug wires

[david brodhead]

Anyone have any pictures of how the spark plug wires were supported coming off the front mount distributers?I end up using cable ties to keep them away from the fan belt.

 

[souNdguy]

there was a tube that bolted acrfoss the top of the head to contaian them.

soundguy

 

[david brodhead]

the wires are in the tube as they go across the head to each plug.The problem is the near interference with the fan belt on the generator side when they come out of the distributer going up to the tube.

 

[souNdguy]

just pull em tight. oem wires might have been 7mm and more bendable..

if the zip ties are working for ya.. keep it up.

whatever works.. works.

soundguy

 

[mhb@ufe]

There is a spark plug wire bracket that bolts to the front cover and holds the two wires coming from the right side of the cap, pn 9N14564, available from this site.

Mark
Plug wire bracket

 

[Bob Harvey]

Seems like you did the right/correct thing. Be a good Idea to look at some pics. in the 'Archives'. There seems to be some 'stand off' clips in the original stuff, but best do what works for you. HPH + MC