9n will not turn over using the key switch

[gsusfan5]

Replaced the solenoid and key switch on the 9n but still will not try to turn over when I try turn the key.
Jumps across the solenoid and turns over. This tractor has been converted to 12 volt.

 

[JMOR]

Replaced the solenoid and key switch on the 9n but still will not try to turn over when I try turn the key.
Jumps across the solenoid and turns over. This tractor has been converted to 12 volt.

Most likely wrong solenoid circuit for key switch application.

 

[gsusfan5]

The one that was on it before (that worked 2 years ago) did the same thing.

 

[gsusfan5]

The one before did the same thing and it had worked before. I'm thinking I didn't get a wire in the right place.

 

[Tgrasher]

Does your key switch have 12 volts going to it? Back track, something is not getting contact.

 

[gsusfan5]

I'm thinking you're right. I'll check for bad connections or broken wires.

 

[gsusfan5]

Hot dog! I found a loose lug and she's turning over fine. Thank you gentlemen!