jon f mn
Well-known Member
Thought is would post some of the things I've been doing recently. A few weeks back I picked up another combine from an online auction. It's a case 1060 which is similar to my 1160, but made for small grains.
It's in really nice shape, but one valve was bad and broke off, luckily just while cranking and not running. I did have a pair of rebuilt heads on my parts machine, so it was just a matter of switching them. Runs good and seems in real nice shape.
Had to put more dirt in the new shed as it had settled a lot. Used the 830 on the scraper and 530 on the case blade I picked up this summer. Also used the 1818 uniloader to push some. Looks good now.
Been doing some mowing too, mowed down the sweetcorn that was finished and mowed the grass that is in a wet spot I've been able to drain so I can plow it.
A couple videos
rumble.com
It's in really nice shape, but one valve was bad and broke off, luckily just while cranking and not running. I did have a pair of rebuilt heads on my parts machine, so it was just a matter of switching them. Runs good and seems in real nice shape.
Had to put more dirt in the new shed as it had settled a lot. Used the 830 on the scraper and 530 on the case blade I picked up this summer. Also used the 1818 uniloader to push some. Looks good now.
Been doing some mowing too, mowed down the sweetcorn that was finished and mowed the grass that is in a wet spot I've been able to drain so I can plow it.
A couple videos
Mowing with 530 and brush mower
rumble.com
