About This 2010

[Allan in NE]

Two lower door windows are cracked and the rear wiper arm is missing. All four loader cylinders have been resealed, PTO overhauled
and the front bolster rebuilt. Includes bucket, bale forks and third link for the 3 point.
I just couldn't find anything else wrong with it. Tractor is as straight as they come.

Dunno guys, I went ahead and wrote the check after owner came down on price.

 

[Scott 730]

What happened to the large wheel weights from the first pictures?

 

[Kansas4010]

I don't have any experience with a 2010 but that one looks pretty straight. Hope it works out for you.

 

[Allan in NE]

They belonged to his neighbor, so they had to come off....

 

[Tx Jim]

It is a very nice 2010. That's the very first JD 2010 that has rack & pinion rear axles/ wheels that I ever remember seeing. I checked 2010 parts catalog & it was an option on 2010.

 

[chuck from neb]

Looks like a pretty straight tractor with all the updates you should do well

 

[Pete in MD]

I think your new 2010 will do a good job for you pushing snow. Glad you pulled the trigger on the deal. Without weights are you going to need chains?

Didn't you used to push snow with a Hydro 70?

 

[Bob Bancroft]

That jumps out right away! Makes it look like a real tractor!

 

[Stroby]

Don't know if you're interested or not, but lonestarwheelweights.com is a good place to get weights that are good quality and made specifically for your model.

 

[Allan in NE]

Gonna need 'em. Thanks!

 

[Scott 730]

(quoted from post at 08:15:32 08/23/23) Don't know if you're interested or not, but lonestarwheelweights.com is a good place to get weights that are good quality and made specifically for your model.

That would be www.lonestarweights.com.

 

[shaun wallace]

I have 10 BW701 weights they fit that era JD. They are in Texas. They need new home other than scrap.