Adding LED lights

[Charles Elliott 2]

Hi, I am planning to add more lights to my MF50 for plowing during the winter, I plan on using LED floods.I figure that by running the lights on a separate circuit, and leaving the stock lights to turn on and off with the key, it should no problem running the LED lights if the stocks are off. If I do recall correctly, some tractors sometimes tended to have 3 incandescent spots. 2 for the headlights and 1 rear facing spot light. The LED's only use 1.06amps each would the stock Delco generator be able to support this, or would
i have to convert it to an alternator?

Here is the link for the lights: https://www.surpluscenter.com/item.asp?item=12-980&catname=electric

 

[Ally Cat]

The only bad thing about the LED. Is they don't get hot enough to keep the snow melted off.

 

[David G]

The HID, not LED, will provide a lot of light. The 4020 was upgraded to these for planting. It is just like working in the daytime.