amazed!!

[mEl]

Can any one direct me to a supplier of head gaskets that will properly fit a 262 buda diesel. A friend has been getting gaskets that run over the edge of the intake pocket,obviously not right, but says that no others are available. Also,some detailed engine specs would be appreciated, I know they are out there but its just a matter of getting the right ones of you interested in my dilema. Am looking for piston protrusion above the block as the block must be planed and the sleeves reset in the block. If anyone cares to help I will appreciate it very much. I am Case man and usually hang out over on their forum and find a wealth of knowledge and know you guys have it to on yor product line, it is just a matter of connecting with the right people. Thanks in advance. mEl

 

[esd19]

Where is he getting the gasket at. Also a little more info on the motor, such as whatis it in.You might just supply all the info you can think of.

 

[esd19]

Has he tried this website:
www.budaengine.com
Shipping Address Mailing Address
The Buda Engine Company, Inc The Buda Engine Company, Inc.
241 Aero Drive PO Box 7762
Shreveport LA 71107 Shreveport LA 71137-7762

Phone 318 222-3348 Fax 318 424-9231