ammeter on 9N

[Rayman66]

How do you replace the original ammeter with a more modern ammeter? One that has wires attached to meter not just running behind it.
Thank you once again for all your help on this project. We got it running well and the clutch etc. replaced.
Thanks again,
Ray

 

[TheOldHokie]

(quoted from post at 04:18:33 02/22/20) How do you replace the original ammeter with a more modern ammeter? One that has wires attached to meter not just running behind it.
Thank you once again for all your help on this project. We got it running well and the clutch etc. replaced.
Thanks again,
Ray

You cut the old wire in half, strip the ends, and attach the ends to the terminals on the new meter. I am a fan of using crimp on ring terminals on the ends of the wires.

TOH

 

[John Deere D]

This works for me..

Bob...

 

[Rayman66]

Thank You very much for the reply. I was thinking that was the way to do it but I really wanted someone with the knowledge to tell me that!

 

[Bob Harvey]

I like soldered on fittings with shrink covers - nearly corrosion proof.