another 12 volt question

gutterman

Member
i have the alt. mounted finally, and am needing instructions on wireing, its a 50' sidemount, someone has put a ballost resistor on it going to the (-) side of coil, do i leave it? from what i can tell reading on-line i should run the white wire from the plug (#2), to the ammeater,does it matter whitch side? then red (#1) with a resistor that i got from radio shack to the key switch, does it matter whitch side? my neighbor came over and said to just tape up the white wire and run the red to the battery. it can't be that easy can it? also what do i do with the 3 wires that are left over from the 6-v gen? sorry to ask this ,i know it has been gone over so much, i looked for a diagram in 8-n serches but the only one i found had been delited. thanks
 
Search in the archives for JMOR's wiring diagrams or go to the other board and search the "How To's" If you don't have the address for the other site email me.
 
8N_263844and_up_alternator_COLOR-2.jpg
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top