Another funny

4520BW

Well-known Member

cvphoto115990.jpg
 
I've tried that many times and it did not work for me. But, I will try it again tomorrow before I remove the engine mount knowing that I will wind up removing it anyway.
 
Many years ago in order to save time on a clutch job, I stacked extensions and was well back along the driveshaft. Getting those two bolts back in was another trick.
 
Only thing missing is the black electrical tape at each joint so it doesnt fall apart ! Ive been down that road !
 
"You have to remove the motor mount to get the last two spark plugs out."

Or, the front tire and inner fender well. 2004 Ford Ranger V6
That was a factory stock truck.

I had a Dodge Challenger back in the day that I had to take the
motor mount bolts out and lift the engine to change the plugs,
but it wasn't exactly as it came from the factory. :)
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top