Another funny

4520BW

Well-known Member

cvphoto118202.jpg
 
The old gmc I have now was back up on the silage bagger and unloaded then it just died couldnt find anything wrong grabbed my jumper cables hooked from the battery to the alternator bracket away she went quick as I unhooked she died went to town got a new ground cable and got the driver back to hauling silage
 
I was working on a railroad ballast tamper. All computer controlled.
Operator was complaining how the comp was reading ghost reading and was
cutting out. As I was going over the machine, I found a 1/4 bolt with the head
welded to the to the frame. There were 8 or 10 ground wires clamped down
on that one bolt. I took them all off, polished a few, replaced a few of the ends
and put them all back on the bolt, which I polished also.
Nearly all the ghosts were gone, and the machine worked much better after that.
 
For sure!!!
At one time I worked for a guy selling trailers. One of my main tools
was a length of wire with an ugly alligator clip on each end.
Whenever anyone came it with a light or brake issue, the first thing I did
was clip that wire to the trailer and to the pickup.
Frequently it was a ground problem. Often, they would say
But it grounds through the ball!!
Not so!!!
 
I bought a power probe turned out to be one of the best things I ever bought when working on lights has a ground on it and then can send power to lights or whatever your working on
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top