Another ID question

jbflying

New User
I have a Ford 2000 tractor with the production code / serial number located behind the starter listed as 6K3B and below that 775. The best I can translate this using the codes online is 1966, October, 03, Day shift. The number on the engine block is C5NN 6015. The transmission is C5NN 7006. The problem is that none of these numbers match what the websites list or the Ford shop manual lists. The examples they have look nothing like what I have. Can anyone decifer this for me? I'm in the process of ordering parts and want to make sure I get the right stuff.
Thanks,
JB
 
Can you post a pic of the tractor? The last two numbers you posted are casting/engineering numbers which generally won't help narrow down the specific model since they may be shared by several different models. The numbers you really need would be stamped into the flat on top of the trans housing behind the starter. The model number should be there and would be something like "21013C" for a pre'68 ag 2000. The serial number should be there also and start with most likely a C or B and less likely an A. This should be followed by a six digit number. Sometimes these numbers are hard to see and you have to scrape off some paint to get to them. If these numbers are gone then a picture would be very helpful.
 
Yeah, that is the problem. The numbers on the flat area behind the starter are the ones that I listed above. That is all that is there. Nothing like the ones that are "suppose" to be there. Here is a picture.
id15379.jpg
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top