Another thought on quick release ORC

[Mikeyt]

I want a quick release PTO shaft for my King Kutter brush hog, but one with a built on ORC. I don't want an ORC on the tractor except when running the cutter. The pin type ORC just takes to long to remove.

So, does anyone make an implement PTO shaft with an ORC that has a quick release? I have seen quick release ORC's on a yoke but I don't know the yoke measurements on my King Kutter.

 

[Dell (WA)]

Mikey.........yep, they do make a "quick-release" ORC. The name 'scapes me ritt now. But I never considered the roll-pin mounted ORC to be an obstacle. I leave mine on all the time.

ORC's come in 2-sizes; original 1-1/8" or modern 1-3/8. Most modern brushhogg's like yer King Kutter are 1-3/8. Its the tractor end that you gotta worry about. .......Dell, the ORC safety preacher

 

[TheOldHokie]

(quoted from post at 15:09:45 11/18/10) I want a quick release PTO shaft for my King Kutter brush hog, but one with a built on ORC. I don't want an ORC on the tractor except when running the cutter. The pin type ORC just takes to long to remove.

So, does anyone make an implement PTO shaft with an ORC that has a quick release? I have seen quick release ORC's on a yoke but I don't know the yoke measurements on my King Kutter.

Klick here [u:2bec25eda3]Quick Detach ORC[/u:2bec25eda3] for a link to one - there are others.

TOH

 

[Tom New Jersey]

I have used a orc (quick release type)on my 6' Bush hog squeeler mower for 20 yrs(on the mower) bought it from the bush hog dealer.