Anyone know the compression height on a Super M piston?

[1903bluepill]

1) what is compression height on the standard flat top piston?
2) do they come in a 4.030 or 4.045 diameter?

Thanks,
Looking to use these in another engine that needs a 2.75"---2.85" compression height

 

[CP1]

My old engine parts book says that is a C264 engine. And gives the compression distance of 3.124. Then the overbore would be 4-1/8 inches..
Some Clevite numbers that are close to what you want are
224-1552. 4 inch and 2.704 Comp dist
224-2024. 4.016 inch and comp dist of 2.609
224-2763.030. 4 inch and comp dist of 2.688
224-2573. 4.017 inch and comp dist of 2.815
224-2574. 4.017 inch and comp dist of 2.818
224-2575. 4.017 inch and comp dist of 2.815

 

[1903bluepill]

Thanks for the info. I'll see if any of these are available or if I can find an internet refernce.