B414 Torque Setting

[wallydog]

Hi All,

1965 IH B414 with 4 cylinder diesel BD154 engine. It's just had a complete engine rebuild so now being reassembled. Can anyone tell me the torque setting for:
1. The flywheel to crank bolts
2. The clutch cover to flywheel bolts (its the dual clutch type).
3. Engine casing to clutch bell housing.
4. Engine casting to front axle.

Thanks, Clive

 

[used red MN]

The flywheel is 65 - 70 ft. Lbs. On the rest just tighten
them tight so they do not come loose. If you need..
to find a bolt torque chart and torque them by size,
diameter of the fastener not the head hex side. And
hopefully you know the difference between a course
and fine threads, they will all be course. Probably all be
grade 5 with three marks on the head. The clutch
cover or pressure plate may have grade 8 with 6 marks
on the head. If the bolts have no ID marks call them
grade 5.
If you send me an email I will get you a link to the
repair manual I can access. It is an IH manual and
covers multiple similar tractors. It is ..English.. or
whatever because on the cover it calls them a
..traktor.. I try not to place links to manuals here
because YT sells them.