backhoe update, info needed

souNdguy

Well-known Member
ok.. went and looked at the tow-a-hoe :) and it's deffinately a chinese northern tool or harbor freight unit. new.

also went by a house that has a woods ?6500? 3pt hoe for sale. guy sold his trasctor has the hoe.. has pto pump, contol valves feel good.. cyls look good.. got most of it's original paint on it.. looks tight.. almost no wear on the pins or bushings or 3pt parts.. don't looklike it's been used much.

Me and my stepfather are looking for a hoe to split between use on out farms.. bury animals, dig small ponds, drainage.. etc.

what's that 6500 worth?

I'm leaning toward the 3pt hoe vs the tow behind.

would WELCOME opinions on this.

from talking with the guy.. I bet we can get the 3pt hoe cheaper than the tow behind...

soundguy
 
(quoted from post at 13:42:40 05/02/11) ok.. went and looked at the tow-a-hoe :) and it's deffinately a chinese northern tool or harbor freight unit. new.

also went by a house that has a woods ?6500? 3pt hoe for sale. guy sold his trasctor has the hoe.. has pto pump, contol valves feel good.. cyls look good.. got most of it's original paint on it.. looks tight.. almost no wear on the pins or bushings or 3pt parts.. don't looklike it's been used much.

Me and my stepfather are looking for a hoe to split between use on out farms.. bury animals, dig small ponds, drainage.. etc.

what's that 6500 worth?

I'm leaning toward the 3pt hoe vs the tow behind.

would WELCOME opinions on this.

from talking with the guy.. I bet we can get the 3pt hoe cheaper than the tow behind...

soundguy

My advice - skip both of them and buy a 70's era TLB. You should be able to find something for very near that price that will out work both of the otehrs combined.

TOH
 
have been looking over a year for a tlb or just a fixed mounted hoe.. like on a ford industrial.

no go on anything under 10K$.. everything I've looked at, including driving up and down the state from miami to panhandle has either had a tractor so worn out that it would need an engine and steering and hyd overhaul to use.. or the hoe was so sloppy that parts were about to fall off.. :)

with budget low now ( thankfully stepdatd will be footing much of the bill ) we are wanting to get the hoe sooner or later. he has some upcoming work to do, and would be nice to stop renting or borrowing a hoe.. it's not alot of work.. but when you need one for 1-2 hours.. you are stuck for renting for a day and the hauling..

any opinion on whether the ride-on towable unit has any tangible benefits over the 3pt woods?

other than towing back and forth? seems like it might not scoot around as much with a tractor on the back.. plus has hyd outriggers vs manual drop pin down ones. I'm assuming the pto pump gpm is going to be mor ethan the 3-4 gpm of the lawnmower engine style.. plus not another small engine to maintain. on the flip side, for a small job.. it probably burns less gas than the tractor does.. etc.

soundguy
 
(quoted from post at 14:06:04 05/02/11) have been looking over a year for a tlb or just a fixed mounted hoe.. like on a ford industrial.

no go on anything under 10K$.. everything I've looked at, including driving up and down the state from miami to panhandle has either had a tractor so worn out that it would need an engine and steering and hyd overhaul to use.. or the hoe was so sloppy that parts were about to fall off.. :)

with budget low now ( thankfully stepdatd will be footing much of the bill ) we are wanting to get the hoe sooner or later. he has some upcoming work to do, and would be nice to stop renting or borrowing a hoe.. it's not alot of work.. but when you need one for 1-2 hours.. you are stuck for renting for a day and the hauling..

any opinion on whether the ride-on towable unit has any tangible benefits over the 3pt woods?

other than towing back and forth? seems like it might not scoot around as much with a tractor on the back.. plus has hyd outriggers vs manual drop pin down ones. I'm assuming the pto pump gpm is going to be mor ethan the 3-4 gpm of the lawnmower engine style.. plus not another small engine to maintain. on the flip side, for a small job.. it probably burns less gas than the tractor does.. etc.

soundguy

I don't know what soil conditions you will be digging in but I had some guys in here to do some septic line work and they brought their spiffy little (Komatsu?) rubber tracked hoe with them. After a morning spent prying out one after another 18" rocks they decided I was right when I looked at it on teh trailer and told them it wasn't going to hack it. They loaded the track hoe up at lunch and returned with their Case 580 - finished the 80% of remaining diggiing in a couple hours. That track hoe was more machine than any 3pt hoe I've ever seen - see where I'm going? I will also add that the reach and digging depth on the little stuff is pretty limited - OK for trenching but not so good for digging pits.

TOH
 
luckilly no rocks on out property past stuff that might resemble some golf balls.

pretty much 2' sand over red or black earth.. not even hardly any clay.

At work we have a case 580L.. but that's gone shortly.. so can't fall back on using it.

i'm faced with small or none.. and I'm wondering which small is gong to be better.. small towable.. or small 3pt.

if money was no option it would be a different story.. I'd love a 555 tlb :)


soundguy
 
Been around and worked on with a couple of the 3 point types and most for light farm work do ok. The one I have on my 8N could sort of be called a 3 point one but has been changed so it is a true mounted unit now. A lot depends on what tractor you plan to hang it on. They are very hard on the 3 point system and you can brake parts and pieces with them. A neighbor who lived close to me had a Kelly 3 point hoe on a Jubilee and he broke the rear end housing where the center link hook to it and he then rebuilt the center link hook up so as not to do that again. I sold both the tractor and the hoe for him years ago, tractor had a broken rear axle and I got $1500 for it also had a loader on it. Sold the hoe and got $750 for it PTO pump etc included. Oh by the way what ever you would think about hanging it on you NEED to have a loader up front or all you will do is pop wheelies and go no place
 

I was looking for a hoe the other day and ran across this. There are a few more on this site. I realize this is a bit far for you to travel but there is stuff out there.

Just look up Lady Equipment, Bluff City TN

http://ladyequipment.com/
 
I purchased a Woods 750 about 10 years ago ($2700). The handiest attachment for my Jubilee ever. With the 7.5' digging depth it is plenty for small jobs.
Two things: (1) You need a rigid top link to the hoe so when you put the out riggers down it will keep the pressure off the rear of the tractor and breaking it. I can lift the rear tires off the ground and move it around with the hoe.
(2)Turn off the draft control off so it does not try to lift the 3 point when lifting on the tractor with the outriggers and do not try to raise the 3 point. With the soil you have it will be a breeze to dig. I'm in Missouri with clay and big rocks but still a pleasure to operate. Yes the front is light, easy to steer using the brakes. WaltMo
a39273.jpg

a39276.jpg
 

You may want to look up stuff on cadplans.com too. Can maybe build one cheaper than buying. Friend has a towed unit. Pretty lite duty. I got my tlb for 4500, 76 JCB 3CIII. Spent about 20 hours on it last week digging out tree stumps and a few small rocks....4'x5'x5' or so.

Rick
 
Here's one I picked up in Clinton, MO a few months back. From a place that is a tractor salvage yard. It's a Ditch Witch hoe. I have plans to convert it to 3 pt or maybe a solid mount. (If I ever get the time. Lot of wants and no time to do anything) Looks to be in good condition. It was $750. I've seen the same ones on Ebay for $3000. If you plan to do a lots of digging Old Hoke is right, You can't beat a Case 580.
a39306.jpg
 
Here are owner reviews for Northern Tool version. http://www.northerntool.com/shop/tools/product_531_531
I think the simplicity of the stand alone unit is a plus. From all I have read, best set-up for tractor mounted backhoe is frame mounted as 3-point puts serious stress on tractor.
 
Shoot Walt we in Misery don't have big rock those is Ozark diamond aren't they??? I have some big rocks with big holes in them that are the holes that is big enough to crawl into and hide from things like tornadoes to bad they are 1500 plus feet from the house
 
If the tractor you plan to mount it on has a loader on it it is not hard to extend the loader arms where they bolt under the rear axle so as to hold that hoe. In my shop that is a job that would man hour only be about 10 or so hours but that means a week for me LOL. But hey I only play any more I do not work so I take my time and when my body says it is break time it is break time. Got a skid steer in my shop right now I am making an adapter plate to mount a set of forks off a Swinger 200. When done the forks will be able to be used on either machine
 
The little tow behind one from N-H is a toy. It is what well off fathers (w/$$$) give to their kid to play in the sandbox.

The name brand tractor attachment hoes are made to work, although on much smaller jobs than a TLB. I have the Bobcat brand hoe that attaches to my 975 Bobcat, and that hoe is built like a brick outhouse. Without the Big Bob, the hoe alone weighs 4,000 lbs, and can dig to 14 ft (depending a bit upon what bucket it has attached). If I hook a good size rock in our clay, that hoe can throw the 12,000# Bobcat around. It attaches directly to the tractor frame, not the lift boom.

Using my 225 Lincoln AC buzzbox years ago, I built a hoe subframe that attached a 14' hoe to a 340 U IH tractor. The subframe is made of rectangular tubing and spreads the forces of the hoe from front tractor frame to rear tractor axle so there is no force concentration point. I can just back the tractor over the frame and bolt it up. The 3 pt mount is OK for light work, but does stress the tractor's rear housing. If you have the time and salvage steel available, build a subframe.

You got a better FIL than I got.

Paul in MN
 
I have a small kubota 3 PT hoe, works perty good for small jobs and will go about 7' deep. It has a special rigid top link to handle the stress.
I have used the towable ones and their more like a toy - I don't think you will be happy.

Be careful, If your used to a 580 = the 3 point is nowhere sa strong you need to take small bites and slow down.
 
Hope this link works. It's new to me to post a link.
Anyone remember this posted here a while back?
A riding lawn mower with a backhoe.
Thought I would try reposting. Talk about a toy. Fun to watch. But why would someone want to put that much work into building one?
Untitled URL Link
 
as was stated, we don't plan alot of digging, nor do we have the big budget needed for a real rubber tire tlb... that's why I'm looking at small ones.. as they are better than a shovel.

soundguy
 
I'd look at buying the 3-pt hoe and making a frame mount for it. What you need to make a hoe work is weight and the tow behinds have very little weight to work with. The 3-pt mounts put too much stress on the lift parts and I never liked how far back they hang off the tractor. Hard to put the weight of the tractor to work that way and it may be unusable without a loader or weights on the front to balance it. Of course that just kills the steering and wears out front axle parts.

I built one from scratch that is still working and cost around $3000, mostly because I bought most of the hydraulics and the 11 GPM PTO pump new. If I was to do that project over, I'd save myself some design/prototype time and start with a used 3-pt machine. The little orange tractor with a loader-backhoe was over $15,000 when I built mine.
2007-0311-0003.jpg" width=800 height=600

MyBackhoe
 
I would rent a small unit and see if it works for you.Friend has rubber track hoe with a log grip that he brings along when he has big logs to saw.I had a 3 foot spring tile that had tilted because of freezing of run off water.He straightened the tile and used the blade to push more fill around the tile.This kept the run off away, no more heaving.His machine is expensive but it does a lot of work for him.I have drilled 7/8 inch holes in 1/2 inch steel with a 50 buck drill press.I have a big floor model now.There are some big boulders under ground here.
 
I have an Arps 80 to use w/my 50 8n. It is nice. Yes it hangs off top link hitch and the front end is light but it is way better than a shovel. I would go with the 3pt for the added stability/work gained by weighr of tractor. It doesn't sound like you are going commercial so why invest in such a heavy rig?
 
I have an Arps 80 to use w/my 50 8n. It is nice. Yes it hangs off top link hitch and the front end is light but it is way better than a shovel. I would go with the 3pt for the added stability/work gained by weighr of tractor. It doesn't sound like you are going commercial so why invest in such a heavy rig?
 
no comercial... we need to be able to bury a cow or horse carcass if one goes down ( has happened.. and there is a service to call for a few hundred$.. but if you don't see the animal go down and find it a week later.. it's too late!

just lil stuff like that.. dif a water line now and then.. been renting lil ride on trenchers for that.. cost is adding up.. for what we pay in a year to rent a trencher or haul a dead horse off.. it would pay for a small backhoe.. well.. probably in the same year...

that woods 6500 is looking good..

soundguy
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top