RedMF40
Not from Iceland!
I bought a tractor yesterday, pretty much the twin to my Massey Ferguson 40. Except that this one is badged both 40 and 50. Ok, I’m sure I’ll get it straightened out. Haven’t actually looked at the ID plate yet. Just looked and the sheetmetal says 50, the ID plate on the tractor says F40. Same as my tractor. I’ll go with 40.
Even though this sounds like a lateral move, it’s a bit of an upgrade for me. The engine sounds strong and looks tight. And it has some kind of loader that works. The main issue—among other things—with my tractor is a rear main seal leak so bad you may as well pour the oil on the ground when topping it off.
I drove 80 miles to see the replacement Massey. I knew pretty much what to expect: A junker that needs a lot of work. In that respect I wasn’t disappointed. All hydraulic hoses need replacing, and it looks like they grabbed whatever they could off a scrap machine to replace the ones on the tractor. Some were almost as long as your garden hose. Some weeping around the hydraulic cylinders as well. Rubber so-so all around, but I saw that in the photos. Power steering works well and the brakes are strong and quiet—a serious shortcoming on my tractor. Sheetmetal is mostly intact, not all bashed in and pretty rust-free. Aside from faded paint, it looks ok.
Asking price at the Mennonite Kubota dealer where they took it in as a trade: $2800. Once I saw the tractor, I knew instantly they had almost no money in it. If they gave the Kubota buyer any kind of credit I’d be surprised. I talked things over with my contact James, a nice enough guy. Very affable and helpful, really didn’t care one way or the other if I bought this old heap.
“$1500,” I told him, knowing he wouldn’t go for it.
“Naw naw, I’ll let it sit for that.” He thought for a moment, or pretended to. “Best I can do is $2250.”
No way I was going to part with over two grand for this thing.
“$1800,” I told him. “Best I can do. And I’m reluctant to even offer that.”
The two of us knew the score: He knew that I knew the dealer had very little if anything invested in this machine. He could sell it at any price and still make a few bucks.
I even told him, once I saw it, that he couldn’t have given much for the trade-in. He laughed, and didn’t disagree.
“I guess I can do $2,000,” he said.
Still too much.
“Well, that’s that. It was a nice drive up here.”
I headed for my truck. It actually was a very pretty drive, and I’d taken almost all back roads. The additional $200 wasn’t going to lead to my financial ruin—it was just the principle. In reality, my initial offer of $1500 was closer to the tractor’s value. At auction, which is where it was probably headed, the price might have gotten bumped up to $1800.
“I guess I can do $1800,” he said as I was climbing into my truck. I have heard this about bargaining with this community: Be prepared to walk away. Apparently it’s true; and it’s not like it was a conscious effort on my part—I just didn’t want the tractor that badly.
I can’t say this was a spectacularly good deal. I do think with a little work it’ll be a good tractor—and what I paid was about what a new middle-of-the road riding mower costs new these days. Maybe less. And I can’t skid trees with a riding mower or hook up three-point attachments and run them off the PTO. And it’s a classic-looking old tractor. And if I sell my old Massey as-is which runs and works and has myriad problems, I may almost break even. Obviously, I’m still trying to convince myself that I made out ok. Time will tell.
Even though this sounds like a lateral move, it’s a bit of an upgrade for me. The engine sounds strong and looks tight. And it has some kind of loader that works. The main issue—among other things—with my tractor is a rear main seal leak so bad you may as well pour the oil on the ground when topping it off.
I drove 80 miles to see the replacement Massey. I knew pretty much what to expect: A junker that needs a lot of work. In that respect I wasn’t disappointed. All hydraulic hoses need replacing, and it looks like they grabbed whatever they could off a scrap machine to replace the ones on the tractor. Some were almost as long as your garden hose. Some weeping around the hydraulic cylinders as well. Rubber so-so all around, but I saw that in the photos. Power steering works well and the brakes are strong and quiet—a serious shortcoming on my tractor. Sheetmetal is mostly intact, not all bashed in and pretty rust-free. Aside from faded paint, it looks ok.
Asking price at the Mennonite Kubota dealer where they took it in as a trade: $2800. Once I saw the tractor, I knew instantly they had almost no money in it. If they gave the Kubota buyer any kind of credit I’d be surprised. I talked things over with my contact James, a nice enough guy. Very affable and helpful, really didn’t care one way or the other if I bought this old heap.
“$1500,” I told him, knowing he wouldn’t go for it.
“Naw naw, I’ll let it sit for that.” He thought for a moment, or pretended to. “Best I can do is $2250.”
No way I was going to part with over two grand for this thing.
“$1800,” I told him. “Best I can do. And I’m reluctant to even offer that.”
The two of us knew the score: He knew that I knew the dealer had very little if anything invested in this machine. He could sell it at any price and still make a few bucks.
I even told him, once I saw it, that he couldn’t have given much for the trade-in. He laughed, and didn’t disagree.
“I guess I can do $2,000,” he said.
Still too much.
“Well, that’s that. It was a nice drive up here.”
I headed for my truck. It actually was a very pretty drive, and I’d taken almost all back roads. The additional $200 wasn’t going to lead to my financial ruin—it was just the principle. In reality, my initial offer of $1500 was closer to the tractor’s value. At auction, which is where it was probably headed, the price might have gotten bumped up to $1800.
“I guess I can do $1800,” he said as I was climbing into my truck. I have heard this about bargaining with this community: Be prepared to walk away. Apparently it’s true; and it’s not like it was a conscious effort on my part—I just didn’t want the tractor that badly.
I can’t say this was a spectacularly good deal. I do think with a little work it’ll be a good tractor—and what I paid was about what a new middle-of-the road riding mower costs new these days. Maybe less. And I can’t skid trees with a riding mower or hook up three-point attachments and run them off the PTO. And it’s a classic-looking old tractor. And if I sell my old Massey as-is which runs and works and has myriad problems, I may almost break even. Obviously, I’m still trying to convince myself that I made out ok. Time will tell.