Basic question - why do we measure gap in points?

robertIL

Member
Okay. I remember being taught to measure the points gap many years ago in shop class. I guess I never bothered to ask Why? Is it a timing mechanism to make sure the coil has time to charge/discharge or just what? It has to be more important than simply breaking continuity if we need to measure it.
 
" Is it a timing mechanism to make sure the coil has time to charge"


Yep. Kettering Ignition System


" An improved ignition system was developed by the Dayton Engineering Laboratories Co. (Delco) and introduced in the 1910 Cadillac. This ignition was developed by Charles Kettering and was a wonder in its day. It consisted of a single ignition coil, points (the switch), a capacitor (to prevent the points from arcing at break) and a distributor (to direct the spark from the ignition coil to the correct cylinder).

The points allow the coil magnetic field to build. When the points open by a cam arrangement, the magnetic field collapses inducing an EMF in the primary that is much larger than the battery voltage and the transformer action produces a large output voltage (20 kV or greater) from the secondary.

The capacitor suppresses arcing at the points when they open; without the capacitor, the energy stored in the coil would be expended at an arc across the points rather than at the spark plug gap. The Kettering system became the primary ignition system for many years in the automotive industry due to its lower cost, and relative simplicity."
75 Tips
 
Bruce, thanks that was very informative. I probably was not clear in my question though.

Why do we set the gap a specific distance? If all I need to do is open and close a switch why .015 and not .050? We do not measure the gap in light switches but there we are only trying to stop the flow. The only reason I can think of is that the size of the gap determines how long the gap stays open/closed and making it larger would not allow enough time for the coil to build up a charge. I.e. a larger gap stays open longer reducing the time the coil gets to charge.
 
As i understand it, gapping to 0.015 or 0.025" sets the point at which the spark will happen. If they opened wider than designed for, the spark would happen sooner.
 
(quoted from post at 07:09:53 05/30/18) Bruce, thanks that was very informative. I probably was not clear in my question though.

Why do we set the gap a specific distance? If all I need to do is open and close a switch why .015 and not .050? We do not measure the gap in light switches but there we are only trying to stop the flow. The only reason I can think of is that the size of the gap determines how long the gap stays open/closed and making it larger would not allow enough time for the coil to build up a charge. I.e. a larger gap stays open longer reducing the time the coil gets to charge.

You have answered your own question:

The spark occurs when the points open. Therefore, one could set the point gap at another value - as long as the distributor is rotated, the proper timing could be maintained.

The manufacturer designs the distributor cam and determines the point gap to work as system with the other ignition components. The dwell is the amount of time the points are closed, allowing the magnetic field to build in the coil. Setting the point gap as specified insures the dwell time is as intended by the manufacturer.

In conclusion; setting the point gap insures the proper dwell time for the coil resulting in the best system operation.
 
Dwell- that was the concept I was forgetting. Thanks. It’s been a very long time since that auto shop class. Thanks for the clarification.
 
(quoted from post at 07:45:16 05/30/18)
(quoted from post at 07:09:53 05/30/18) Bruce, thanks that was very informative. I probably was not clear in my question though.

Why do we set the gap a specific distance? If all I need to do is open and close a switch why .015 and not .050? We do not measure the gap in light switches but there we are only trying to stop the flow. The only reason I can think of is that the size of the gap determines how long the gap stays open/closed and making it larger would not allow enough time for the coil to build up a charge. I.e. a larger gap stays open longer reducing the time the coil gets to charge.

You have answered your own question:

The spark occurs when the points open. Therefore, one could set the point gap at another value - as long as the distributor is rotated, the proper timing could be maintained.

The manufacturer designs the distributor cam and determines the point gap to work as system with the other ignition components. The dwell is the amount of time the points are closed, allowing the magnetic field to build in the coil. Setting the point gap as specified insures the dwell time is as intended by the manufacturer.

In conclusion; setting the point gap insures the proper dwell time for the coil resulting in the best system operation.

If I remember correctly wasn't it the Chevys that had the little door in the dist. cap to open so you could put an allen key in there and adjust the dwell on a running engine with a dwell tach?

I always wondered why all auto makers didn't adapt that system.
 
You are right, Caryc, but it wasn't just Chevy's it was the whole G.M. line. As to why other auto makers didn't use it, I'm sure it was patented. By the time the Patent ran out, all manufactures were using solid state ignitions.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top