Be it ever so humble....

kcm.MN

Well-known Member
Location
NW Minnesota
Puzzle: https://jigex.com/cksb

mvphoto67074.jpg
 
Similar, but different. The tower in Pisa is structurally sound, but the foundation is the problem. It's a very heavy building on unstable ground. This old silo has shifted, but the roof is still level!
 
About 60 years ago, there were a lot of those silos just sitting unused. Our neighbor, Old Fritz, would go around and ask the owners if they wanted their silo taken down
and materials removed free of charge. Most of them agreed and Fritz would climb up and squirt liquid wrench on all of the turnbuckles. Then, he'd come back the next day
with his flatbed wagon behind his John deere A and tie a long cable to the top of the silo and then start down, loosening the turnbuckles as he went. When he finally got
down he would attach the cable to his tractor and pull. The entire silo would collapse doing very little, if any, damage to the staves. He would then load the staves on
his wagon and haul them home to use for fences, feed bunks, etc. Free, straight cedar lumber for the taking.
 
I've dropped two. One tile- on Dad's farm-we backhoed a trench and two of us started knocking out tiles working away from each other with sledges from the
trench side. A bit past halfway it crunched two bottom layers of tiles and fell in to the trench-bullseye. The other on my farm was concrete "bricks" that had
deteriorated at the bottom and had 5/8" circular rods around it holding it together. I hooked on to the bottom band with a long cable and jerked it hard with
the tractor. It collapsed straight down on itself. It made great rubble for washouts and a creek crossing. My wife taped the process "for something to remember
me by"
 
We dropped a 12 X 40' poured concrete silo one time. Around 1952, I think. We chopped, with stone hammers, around the base just as you described, with help and supervision of a Madison Silo Company foreman. Had a long cable attached to the top step. When we got about almost halfway around we gave it a tug with a John Deere A. Nothing happened. Chopped some more until we got halfway around, gave it a tug and down she came. Broke into hundreds of pieces. Hired man got a picture of it at the 45-degree angle. Madison Silo took a lot of them down that way.
 
I believe the barn is leaning the other way making it look worse then it actually is.
The best time to take a silo down is the last time you empty it. Pitch 2' of silage out and knock off 2' of block. Repeat, repeat. When silo is empty it is also taken down.
 
I wondered back when, how long is a silo, hog barn, cattle operation used? For it's capital cost at the time it is built, does it ever do too much more than pay back
it's cost over time, 10 15 years? Not that it can't it is that we as farmers have only so many years in us of productive endeavor and then what the heck? Without an heir
apparent this whole situation of carrying on is getting old. So for equipment and buildings they have a life for which they are used. Tough go round letting stuff like
that go. Father time walks on and we are left to wonder and some to dream. Nice pic, I envy the title holder.
 
Nephew had a 56 Ford at one time that he building as a stock car racer. He was roaring up the lane from the woods to the
old barnyard. About 1/4 mile straight away. When he got to the barnyard and tried to turn, the tires just slid on the wet
grass and continued straight. Burying that Ford up to the windshield in that old brown glazed tile silo. Pulled it out and
not too much damage to the car, the silo stood for 4 or 5 years till it was torn down. And no injuries, except to his
pride.
 
Believe some of the apparent tilt is due to perspective. Another note is distortion caused by camera lens. If you use
the dark window in the (almost) center of the picture, as you get further away from the window, everything is leaning away form the vertical lines of the window.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top