Bohinny

Member
I just wanted to let you know i fixed my problem with my carb running better with the main needle all the way out. I took the main jet out and the econo jet out to compare size. the econo jet was well over .070" and main was under .040" I guess lack of quality control on replacement carb. i used a 1/16 drill (.062")on the main slaped it back together and set the main needel two rounds open and fired right up and minor adjustments and is good as new. Might take a look at yours.

Thanks for all the replys to my problems
Bohinny
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top