Bolsters

[kub6040]

Will a 460 bolster fit on a 504 both farmalls . Thanks

 

[used red MN]

They have different part numbers, cannot tell you if they will interchange. I assume you are talking about the part that mounts on the tractor the wide front pivots on.

 

[kub6040]

The part that fits between the frame rails .

 

[used red MN]

A 460 is a narrow frame tractor 18 inches outside to outside at the channels beside the engine, same as an H and 300. The M, 560, 706 up through the 56 series are wide frame 20 inches O to O. Not sure which the 504 is.

 

[D Slater]

460 and 560 use the same size bolsters. Frame rails widen on a 460 from clutch housing forward. Think the 504 has differences from what I remember. 504 frame rails bolted to outside of clutch housing but can't remember checking width.

 

[dewy]

im curious kub6040 whats the 504 measurement on that bolster......................dewy

 

[kub6040]

Used red , the 460 and 560 have the same bolster

 

[kub6040]

Dewy it fits

 

[dew67]

Are you putting a wide front end from a 460 or 560 on your 504?