Brush Cutter

Butch T.

Member
Hi,
Was hoping the community could help identify
a brush cutter I recently bought. I have
looked for tags but haven't found any.
Thanks
 
(quoted from post at 06:39:12 08/05/23) Hi,
Was hoping the community could help identify
a brush cutter I recently bought. I have
looked for tags but haven't found any.
Thanks
mvphoto108223.jpg
 
Thanks, After I used it . I noticed some pale green paint on one of the sides.

I did find a number on the gear box. I think it says NA50-1.

This post was edited by Butch T. on 08/06/2023 at 04:00 am.
 
Richard,

Thank You for the help. I took a picture of the gearbox. It looks like it had a tag on the front of it but it had been painted over. I used the cutter and it performed well. I did notice on the side where some of the paint had come off it looks like the original paint was green.


cvphoto160278.jpg


cvphoto160279.jpg
 

Don't know what hog you have there. But I'm curious if I guessed correctly that your tractor is a JD 1520, from just that little piece of it visible in the picture.
 
Hi,

I have another questions. After watching numerous videos on brush cutter setup and operation. I wasn't sure what pins I should attach the drag links to. I used the bottom pins and it allows me to raise it at least 2 ft or more off the ground . Is that correct? I also wasn't sure what hole to put the top link in since there are three of them. I am pretty sure the top link is to long. The original disappeared when I had it in the shop to replace the exhaust manifold and that is what they gave me as a replacement.
 

Depends on your goals. Generally, having a little bit of a tilt down towards the tractor while you are cutting makes operation easier, as the blade cuts the incoming material at the lowest point of its swing as it comes under the brushhog, with the tops pushed away from the blade...easiest cutting. And a slight slant up towards the back of the deck means that material can more easily exit the back.

Doing that, however, means that you need to adjust to keep the front from digging in.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top