bush find 660

rustred

Well-known Member
still a few hard to find diamonds out there, they think it was sitting for bout 20 years in the abandoned yard site. was parked by the bush now its in the bush. got her drug out and home. they were glad its going to a good home and not the scrapper. i removed the glow plugs and give it a good shot of snake oil in the cyl's. kinda got a surprise when i tryed the hand crank as its not stuck. other bonus , it has diesel in the tank also. that junky cab will be off first thing once i get at it. as you could see it was sunk right to the rims front and an back. reshingling the tractor shed last couple days plus harvest.
cvphoto100080.jpg


cvphoto100081.jpg
 
Looks pretty good. Glad the engine isnt stuck. Hopefully it wont be hard to get running. I dont know a lot about these but I assume that is an aftermarket cab someone added?
 
Nice save! The 660 is on my short list to find. Back in the 60's my dad had a 460 gas that was used on the mounted picker, and my uncle had a 560 diesel that was main tillage tractor and run a corn sheller. He bought a 660 diesel they called Jake that had a plywood cab on it to help out with the tillage work. Dad plowed a lot of bean ground with it. They also had a 303 and 403 combine. Those three tractors and combines all took the same filter! I have a 460 gas and my Uncles 560 diesel he bought new. When my kids get a little older I hope to find a 660 so they can go out plowing with him:) Thanks for sharing.
 
I agree. Us dry landers would have give a lot to be in the shade, or out of the wind.
And when we seeded winter wheat, the transmission heat kept us warm.
 
You know I do to, the cab kinda ,I kinda appreciate it . Running that machine in February in that cold ,the operator would sure like a break from the cold .
Not that bad construction, either for early design . Not a deerstander
 
ok, first one here can have it! i will even remove it, ha ha, it will be removed. its not factory and just a hot rattle trap for me. plus a pain in the azz just to get in and out of. i also have the same cab on another 660 it free also. plus have one on a super w6ta its free also. ok now i will see how serious u guys are. lol.
 
yes that is factory wheels. on my other 660 i have the factory weights for the front wheels.
 
well this is my 6th 660 and i have at least 4 cracked heads sitting here, between 560's and 660's. you either like em or hate em, and i really like them. i been around and driving these 282's for over 50 years.
 
one thing with ihc, they dont make a different part for every model of tractor. fuel and oil and hyd. filters are all he same for these 60 series models. even the gear shift pattern is the same since 1940 right till these 60 series in the 1960's. they are a power house when weighted up.
 
I always thought if I had a 2 post rops I could crawl in on and then warp some of that industrial Saran Wrap around the rops and at least keep part of me warm
 
With that many of the same model. I would keep one with cab for cold weather work and the rest could be open station for summer work.
 
Rust red, spend many hours driving a 660 wheatland just like that one in the mid 1960s on my cousins farm in southern Alberta, Canada. It had the same cab, no AC in those days, it was a sun and wind shade but not much of a dust barrier. Did a lot of summer fallowing with a 21ft knoble blade in 3rd gear with the D282 humming along at 2100 RPM. My cousin had two 660s the same and that spring had traded a 650 for an IH 1206.
Many good memories.
 
the 282 in the 660 runs at 2400 rpm under load, while the 282 in the 560 runs at 1800 rpm under load. and they do sound nice hummimng along as you say. its actually getting hard to find nice original 660's. this one is the first year out, 1959 and has the half fenders as i call them. got 3 1959's and all these fenders. the other ones have the full fenders over the tire. the one i use in field is 1961. i am in central alberta.
 
its the same crank the massey 44 special uses. first time i saw a crank with the 660 i said well, thats the same as the massey 44. sure is
handy to set valves and pump timing.
 
I know of a 660 in southwest Montana with an engine with very few hours on it. I suspect it would be available, probably at a good price.
 
The cousins farm was just about 30 miles east of Milk River, AB and south of Lucky Strike, AB and a few miles north of Montana, USA border. Most of the farm was sold when he and his wife retired but they kept a section for the children, the childern are all retired now themselves but rent the section to a local farmer. Instructions from my Cousin was to run the 660 @2100 RPM not WOT. We visited the area a few years ago and the farms and equipment have gotten larger and no more summer fallowing, GPS no till planting RR crops, touch up spraying, harvesting with two GPS guided NH combines with 48ft MacDon headers and semi trucks to haul the crop with. According to one of the children this years crop was below average but not a total disaster.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top