CA 3 point

[Aml]

What is missing here and where can I find it, the switch on the right operates the pto and the pulley, how do you fire up the arms? any idea what the remotes are for thanks

 

[Larry Bennett]

On my 52 CA the lever on the pump operates the arms as well as the pully and remote .

 

[bg/mo]

first off, that is not a three point, the pto has to be engaged for the hydralic to work. and you are missing the platform that goes under the seat, and maybe the hydralic lever. it also looks like the cylinder on the left is missing, and the one on the right is not hooked up.

 

[macec3(TX)]

Here is my 55 CA 3 point.

 

[JMS/.MN]

There are two levers- one activates the pump, pto, and pulley. Another activates the lift arms and the remote valve, after the first one is engaged.

 

[Jg20601]

Confuzled somewhat by looking at the pics of yur AC
Macec3s tractor has a 3 point hitch

Have seen pics of some others that have no hydraulics and a fixed drawbar... others with a snap coupler

On the B and C tractors I have used - you move the lever that turns the pulley and PTO on.
This also turns the external oil pump. If you move the lever on the pump one way oil out of the rear end will flow out the hole in the pump.

The hose connected to this hole went to a hydraulic cylinder like the one in your previous pic. The cylinder mounted between the axle housing and the rockshaft. The rockshaft lifted the implement via chain or link.

If you move the lever on the external pump the other way it allows oil to return to the rear end.

In the middle position both ports are blocked allowing you a type of depth comtrol. If you see the plow is going too deep or shallow a tap on the lever adjusts that.

Does yours have a functioning external oil pump?

 

[Jg20601]

Checked around today, and what others have done is if they get the hydraulics working they buy a conversion kit... several dfferent ones out there