cahse head tools

[Glen Johnson]

I"m looking for a torque tool to fit a case vac head, does any one know where I can find one?
Thanks
Glen

 

[Joe (Wa)]

You could try a Snap-on dealer, p/n is S8663B. It isn't on their website anymore, may have been discontinued.

Joe

 

[BarryfromIA]

If you don't find one, go to a pawn shop and buy a few cheap used tools and cut and weld own you have your own tool. The used tools are cheap and will work well for special tools.

 

[rbradk]

I ordered one from mcmaster-carr. It is called a 3/8 drive box end wrench socket. There is a torque multiplier given with the tool. I believe it is 1.2 times wrench setting. Worked well for the vac head bolts on the side between the pushrod tubes.

Brad

 

[Glen Johnson]

Thanks guys! I guess I couldnt type last night..