cam

[muench]

any input would be nice i have got my farmall H stroked with longer rods shaved the head bare block and oversized pistons What would be the best cam to use

 

[Blackfarmall]

Call sonny at bullet cams. They did a cam for my 300, Did a great job! Very nice people to deal with. Only took 2 weeks to get it back.

 

[MRGJNV]

Heard good things about Sonny as well but it would be nice to know what cam grind specs go with what engine combo. Like what grind you had done to a stock bore and stroke and what grind you had done one to a larger bore and stroke engine.

 

[Blackfarmall]

Its been a year or so but if i remember right, Duration was 220 @ .020 and lift was 330. Engine is stock stroke but bored over to 200 ci. has a header and lp head. But we run high rpms. sonny said the power range on that grind is between 1800-2600 (if i member right) but it seems to have great power past that. If you have degreed your stock cam youll see that they are down around the 800 rpm range and have horrible duration and lift.

Matt