Carb Adjustment

[DRD in Pa]

Finally got the 801 running againg after having problems during the winter. I rebuilt the carberautor thinking that was the problem but it ended up being the points and condensor that fixed it. Now im having problems getting the carberator back into adjustment. The tractor has a little flutter or putt mainly with no load on it. What is the best way to get the adjustments set back to where they were before the rebuild? The carb worked fine before the rebuild. Any help would be appreciated.

 

[awhtx]

With the engine idling you have to alternate back and forth between the idle mixture screw (on top of the carb body) and the idle stop screw (on the engine side of the carb) until the engine will idle smoothly at 400 RPM.
Once you have it idling correctly you can adjust the load mixture screw (on the bottom of the carb) with the engine loaded up such as when pulling a plow.