Carb

[dick benson]

I’m working on a jd G carburetor. Is there anywhere to get a main nozzle.

 

[brendonh]

Usually, they can be salvaged. How bad is yours?
Torch tip cleaners work for that. We used to soak them in a gallon paint can labeled carburetor cleaner, but I haven't seen any of that for years.
I'm sure some vendor on the web or even ebay would have used ones laying around for sale.

Hmmm, forum doesn't like my link, so I can't post it i guess.

Maybe this...

https://www.yesterdaystractors.com/John-Deere-G_Carburetor-Kit-Comprehensive_MSJD51C.html

 

[dick benson]

branding, I took it apart 2-3 weeks ago. I always keep everything in a tray. I don’t remember the nozzle.
I’ve never worked on a JD carb. I got a kit delivered yesterday with good pictures and descriptions.
I can’t find the nozzle and don’t remember removing it

 

[JIM MN]

Is the nozzle still in the bore of the main carburetor, stuck in? If still in, cut threads in center, turn in screw and pull out?

 

[Mark Poss]

Is the nozzle still in the bore of the main carburetor, stuck in? If still in, cut threads in center, turn in screw and pull out?

Sometimes they are tough to get out even with heat. Like Jim said the best way is to make a puller. 1/4” tap works on an A carburetor not sure if it will work on a G carburetor.

 

[greenmech]

I’m working on a jd G carburetor. Is there anywhere to get a main nozzle.

Roberts carb Shop in Iowa. Ron MN

 

[Fixingfarmer]

McDonald carb and ignition will have individual parts for the carb if it isn’t listed

 

[Mike(NEOhio)]

You can make a puller with a 10-32 screw. Look at Roberts catalog. Once you move it a bit it comes right out. Just sticky, that's why they have a spring under it.