carburetor

[willy N.Y.]

what replacement carb. would I use to replace
a tsx33 on a ford n9? thanks in advance for the advise.

 

[souNdguy]

a tsx 33, or one of the 241 variants.... I think a Zenith 13876 will fit also.

soundguy

 

[old]

Why replace it instead of a good rebuild?? Yes as sound said the TSX33 or one of the 241s they had like 3 of them, A,B,and C. I would not get one of them new made in that place of almost never right but a true factory type rebuilt one. nnalert sells them but they are not cheap as in around $200 give or take a bit and a good simple kit to rebuild one is less then $20. I have only seen 2 or 3 that could not be rebuilt. Shoot look up GB and I'd almost bet he would rebuild the one you have if you have one that is

 

[lha]

Get a walker or napa comprehensive kit and clean,dismantle,and rebuild it.Get a manual,it shows all the parts,and pretty much tells you how to fix it.Look at the left side of the page,and under research & info,there is a lot of good help.---lha

 

[Sawatch 8N]

I found a site when I did my rebuild that explains/shows clearly how to rebuild, maybe Smiths site. There are 2 types of kits, one basic & one full depending on your carbs condition.

 

[ScottMacKay]

Or if you are not comfy with a carb or do not have the time, find someone who handles em to do it for you. A carb is a carb is a carb and there is even a super step by step you can have the person too for any of the specifics of this tractor's carb. Def get the kit too if you are not sure when it was last cleaned.

-Scott

 

[grhouse]

You can find a lot of good information here. Gene
Marvel Schebler Carbureter