case 1030

[AARON ANDERSEN]

how do i turn injection pump up on a case 1030?..just doing it for the pull tonight then im gonna turn it back down,thanks

 

[Eldo case]

Plate on back of pump with 4 little bolts. Pull the plate and under it is a screw with a jam nut about a 7 mm jam nut turn it in a turn or turn and a half. If too much you will get allot of smoke and drop the power. My best guess without being their to see how the tractor acts is one turn in. GOOD luck!

 

[VicS]

If you turn it in all the way, be sure and back it out at least a 1/2 turn. If you don't the engine will run away when you start it. Only way to kill it is to shut off air or fuel. Learned this the hard way.