CASE 1370 POWERSHIFT PROBLEMS

[DEERE265]

HELPING A FRIEND WITH CASE 1370. DID A DRIVE TEST SLIPS IN ALL POWERSHIFT EXCEPT C1. CI WILL LUG ENGINE DOWN WITH BRAKES APPLIED DID PRESSURE TEST ALL PRESSURE SEEMED FINE LUBE 60 PSI @ IDLE 80 PSI@ HIGH IDLE CI 160 PSI @ IDLE C2 160 PSI @ IDLE C3 160 PSI @ IDLE C4 160 AT IDLE ALL GOING UP WITH HIGH IDLE.ALSO SEEMS CLUTCH IS NOT DISENGAGING GRINDS WHEN TRYING TO PUT IN GEAR THANKS FOR ANT HELP ALL THE GUYS THAT USED TO WORK ON THEM AROUND HERE HAVE RETIRED

 

[1370rod]

Clutch pressure at rated rpm 180-210 is best, but if this tractor does not slip in 1rst, but will in 2cd + 3rd means you have a issues with C-3. The hyd part of C-3
sounds OK, so that means a mechanical problem and those can only be fixed by splitting and tearing down the powershift for inspection. The torque limiter could be
slipping but you should be able to get it to slip in 1rst also. Rod.

 

[DEERE265]

I FORGOT TO MENTION IT ALSO WILL NOT MOVE IN REVERSE