Case? 3 bottom plow

[Tweeter]

I have what I believe is a Case 3 bottom 3pt plow. Can anyone identify make/model? I need a replacement shank/standard for one of the bottoms.

 

[RJKeith]

I have what I believe is a Case 3 bottom 3pt plow. Can anyone identify make/model? I need a replacement shank/standard for one of the bottoms.

Looks like an MTA

 

[bradley martin]

I have what I believe is a Case 3 bottom 3pt plow. Can anyone identify make/model? I need a replacement shank/standard for one of the bottoms.

I agree. MTA

 

[Tweeter]

Thank you! I googled a MTA and I agree.

 

[casecollectorsc]

Where you located? Probably got one here...E SD.

 

[Tweeter]

PA

 

[connor9988]

I have what I believe is a Case 3 bottom 3pt plow. Can anyone identify make/model? I need a replacement shank/standard for one of the bottoms.

 

[Tweeter]

Where can replacement wear parts be purchased for this plow?

 

[bradley martin]

Where can replacement wear parts be purchased for this plow?

Wear parts for thec14" eagle bottoms are few and far between. 16" points are available and will work on the 14" bottoms. Moldboards, shins and landsides are generally not available unless you luck into some NOS old stock. As far as I know, no one is currently producing new parts.

 

[connor9988]

Where can replacement wear parts be purchased for this plow?

Moldboard - Steel

Shin

Landside (Oliver but fits Case too)

Poly Moldboard Cover - This is for the Case EX bottoms and will fit both 14 & 16" moldboards. They can do them in other colors than yellow too. The title on the page is wrong it is not CaseIH. It is a real J.I. Case moldboard pattern. They will also make custom ones if you send them the old moldboard.

Rib Share

 

[bradley martin]

Moldboard - Steel

Shin

Landside (Oliver but fits Case too)

Poly Moldboard Cover - This is for the Case EX bottoms and will fit both 14 & 16" moldboards. They can do them in other colors than yellow too. The title on the page is wrong it is not CaseIH. It is a real J.I. Case moldboard pattern. They will also make custom ones if you send them the old moldboard.

Rib Share

Connor., does the 16" steel moldboard fit the 14" bottom? I knew the 16" shin and shares would work. Thanks for the information.

 

[connor9988]

Connor., does the 16" steel moldboard fit the 14" bottom? I knew the 16" shin and shares would work. Thanks for the information.

Yup, sure does.

 

[Tweeter]

Moldboard - Steel

Shin

Landside (Oliver but fits Case too)

Poly Moldboard Cover - This is for the Case EX bottoms and will fit both 14 & 16" moldboards. They can do them in other colors than yellow too. The title on the page is wrong it is not CaseIH. It is a real J.I. Case moldboard pattern. They will also make custom ones if you send them the old moldboard.

Rib Share

Conner - Do you know which trashboards and coulters fit this plow?

 

[John Saeli]

Where can replacement wear parts be purchased for this plow?

All the 14" wear parts fit the 16" plow as both frogs are the same. CASE has crossed all the 14" part numbers to the 16" part numbers, but have eliminated all but the shares. shoupparts.com has the Shares and Moldboards. Be sure to order the "4 bolt share".

 

[connor9988]

Conner - Do you know which trashboards and coulters fit this plow?

I do not think anyone makes Case trashboards anymore. You may need to find parts plows to get them from. There may be trashboards from other brands that fit but you will have to match up bolt holes and other dimensions.

As for case coulters. I swap mine out to Kinze no till hubs and blades.

 

[Tweeter]

Moldboard - Steel

Shin

Landside (Oliver but fits Case too)

Poly Moldboard Cover - This is for the Case EX bottoms and will fit both 14 & 16" moldboards. They can do them in other colors than yellow too. The title on the page is wrong it is not CaseIH. It is a real J.I. Case moldboard pattern. They will also make custom ones if you send them the old moldboard.

Rib Share

Conner - The Landsides you reference did not fit this plow. The bolt holes do not line up. The Ribs and Shins worked great.